Final PRO ceramic sealant -NEW-
FINAL PRO- ceramic coating
The FINAL PRO not only guarantees you tested and safe ingredients but also maximum performance - from surface smoothness to intense shine to impressive hydrophobicity (water beading properties).
Developed, manufactured & certified in Germany. FINAL PRO is your state-of-the-art ceramic sealant - for professional use!
Certification in various classifications. Current: DIN EN ISO 9227, DIN EN ISO 6270-2, DIN EN ISO 16474-2, DIN 5002. & others in the test process ** Service life ("lifespan") varies depending on intensity of use and care!
Product description
New generation of ceramic sealing – perfected in Germany FINAL PRO sets standards in terms of performance and security. It complies with all German and European guidelines regarding ingredients and therefore ensures a high level of product safety without compromise. For example, it is free of PTFE & PFAS.Absolute top performance
FINAL PRO takes performance to a new level by offering outstanding hydrophobicity, paint smoothness and shine. Our development work particularly focused on water-beading behavior, as this effect is a top priority for many users. In this product, we combine the latest technology and current guidelines with our years of know-how when it comes to the expectations of professional car care professionals and their customers.
User-friendliness
Of course, we also looked at user-friendliness. This is the case with the FINAL PRO without any problems. If all processing instructions are followed, “effortless” application is possible. But be careful! A ceramic seal like the FINAL PRO is an absolute professional product - if there are any uncertainties regarding the processing or the spatial or technical requirements are not met, contact a professional vehicle care/paint company to have the product installed on your vehicle .
The product "Final PRO" is a one-layer ceramic sealant that is suitable for... was developed for professional use. Improper handling this product can cause serious damage. If you are unsure about the correct application, we strongly recommend that you contact contact a specialist company to have the ceramic sealing done professionally to be carried out.
Before use
Should there be an undesirable reaction with the surface during application occur, the coating process must be interrupted immediately. The The affected component cannot be cleaned with a finish polishing process cured Final PRO coating.
A compatibility test must be carried out before the coating process begins absolutely necessary in an inconspicuous area of the surface!
Spatial claims
To process our Final PRO, choose a well-ventilated, exposed, dry & clean space. Never on hot surfaces or process in direct sun. Processing temperature +15 to +25C°.
processing
The painted surfaces to be sealed within the scope of the standard Process sealing preparation. (Cleaning, polishing etc.)
Degrease the pre-treated painted surfaces with the “Ultra Degreaser”.
A small amount of “Final PRO” in a suitable one Apply coating applicator and spread on the paint surface.
(Start with areas of a maximum of about 60cmx60cm to get a feel for to get the processing.)
The “Final PRO” should take about 3 minutes. after application, can be “polished” with our soft 300gsm microfibre cloths. (without exerting pressure)
Danger!
The final surface smoothness only occurs with the beginning of the drying phase, in the first hours after coating; this process can take up to 12 hours!
control
Check the coated surfaces in different light angles for any “high spots” (visible coating residues). You can do this until maximum 10 minutes. after application by wiping lightly Remove with the microfiber cloth.
Drying phase (at approx. 20C°)
(Information may vary depending on climatic circumstances!)
12 hours= Waterproof/ Ready to ride*
5 days = Completely cured. / Vehicle can be used in full condition Extent used & washed.
Hazard-determining components for labeling
Signal word Danger
Hazard warnings
Highly flammable liquid and vapor.
Harmful if swallowed.
Causes serious irritation of the skin and serious eye damage.
Causes serious eye damage.
May cause allergic skin reactions.
May cause drowsiness and dizziness.
Harmful to aquatic organisms, with long-term effect.
safety instructions
P101 Is medical advice required, packaging or
Have the identification label ready.
P102 Keep out of reach of children.
P210 From heat, hot surfaces, sparks, open flames
and other types of ignition sources. Do not smoke.
P260 Do not breathe dust/fume/gas/mist/vapour/spray.
P264 Wash hands and face thoroughly after use.
P271 Use only outdoors or in well-ventilated areas.
P280 Protective gloves/protective clothing/eye protection/
Wear face protection.
P301+P330+P331 IF SWALLOWED: Rinse mouth. NO vomiting
bring about.
P303+P361+P353 IF ON SKIN (or hair): All
Remove contaminated clothing immediately. skin with
Rinse with water or take a shower.
P305+P351+P338 IF IN EYES: For several minutes
rinse gently with water. Any existing ones
Remove contact lenses if possible. Continue rinsing.
P310 Call a POISON CENTER/doctor immediately.
P403+P235 Store in a well-ventilated place. Keep cool.
P405 Keep locked up.
P501 Contents/container of an approved
Dispose of to waste disposal facility.
Safety data sheet available on request.
